AUS-SPEC Roadworks and Bridges Package

0010 Quality requirements for design

This worksection Template is applicable to providing a quality management system to AS/NZS ISO 9001 for engineering design processes required by Council for engineering works. The requirements are applicable to all design work whether undertaken by designers within Council, a Consultant or a Subconsultant. The quality management system must ensure that the Council works infrastructure is designed fit for service and of a standard reasonably maintainable by Council as a community asset.

0011 Development and subdivision of land

This worksection Template is applicable to the design requirements and planning permission process for development and subdivision of land within a Council area.

0021 Site regrading

This worksection Template is applicable to site regrading for both Council works and land development and subdivision approved by Council.

0041 Geometric road layout

This worksection Template is applicable to the geometric layout design of minor roadworks, using principles of street design to ensure safety, improved amenity and to reduce pedestrian/vehicular conflicts. This worksection applies to minor roads within the domain of urban and regional Councils. For major highways, refer to the relevant State Roads Authority. State and Territory requirements must be included for certain Austroads requirements.

0042 Pavement design

This worksection Template contains procedures for the design of the following forms of pavement construction:

• Flexible pavements consisting of unbound granular materials.

• Flexible pavements that contain one or more bound layers, including pavements containing asphalt layers other than thin asphalt wearing surfaces.

• Rigid pavements (i.e. cement concrete pavements).

• Concrete or clay segmental pavements.

0043 Subsurface drainage (Design)

This worksection is Template applicable to the design and documentation of subsurface drainage.

0044 Pathways and cycleways

This worksection sets Template out requirements to be used in the design of various types of cycleways and pathways.

0061 Bridges and related structures

This worksection is applicable to the design of the following structures:

• Road traffic bridges.

• Pedestrian bridges including bicycle and wheelchair access.

• Structures other than bridges associated with road construction e.g. culverts, retaining structures, sign supporting structures and noise barriers.

• Detention basins.

• Structures providing public safety e.g. safety barriers, safety rails, protection screens and street lighting poles.

• Temporary works.

0074 Stormwater drainage (Design)

This worksection Template is applicable to the design of stormwater drainage systems for urban and regional areas. It covers hydrology and hydraulic design for a total stormwater drainage design and includes Water Sensitive Urban Design principles of stormwater harvesting and re-use. It is intended to be used with Council’s own Handbook for drainage design criteria. This worksection assumes that the Councils maintain a Handbook which is provided to the design consultant to inform the design.

0075 Control of erosion and sedimentation (Design)

This worksection Template is applicable to planning and design control measures to:

• Reduce the erosion hazard of any particular construction activities.

• Control stormwater flows which carry sediment to an acceptable level of soil depletion.

• Provide, post-construction, wetlands and/or water control structures for a fully rehabilitated site.

0120 Pre-tendering contract preparation

This worksection Template is a framework for the development of request for tender documents based on AUS‑SPEC worksections. It includes a cover page and sets out the documents required for Part A Tender information and Part B Contract documentation volumes.

0121 Tendering

This full worksection Template reflects the principles of the main Australian codes of practice, including AS 4120 which is cited in a number of state government's codes of practice. The worksection assumes head-contract tendering. It is applicable to non-contractual material and so does not form part of the contract documents.

0122 Information for tenderers

This worksection Template is applicable to an introductory document to enable prospective Tenderers to determine whether the scope and type of works in the proposed Contract is within their capability. It is a separate document to, but aligned with, 0123 Conditions of tendering.

0123 Conditions of tendering

This worksection Template is applicable to conditions of tendering including contract information, tender submission requirements, tender evaluation and selection criteria. It assumes traditional paper-based tendering methods but this worksection can be adapted to suit digital distribution and eTendering (electronic tendering system). If using eTendering, consult with the administrators of the system about the standard forms provided as part of the system and about amending these to suit your requirements. The worksection should align with 0122 Information for tenderers, a separate, introductory document for prospective Tenderers. This worksection does not form part of the contract documents.

0124 Tender submission documents

This worksection Template is applicable to the returnable forms and schedules nominated by the Principal for completion by the Contractor for inclusion in the Tender submission. The completed worksection forms VOLUME 4 -Tender Submission Documents of the request for tender (RFT). It assumes traditional paper-based tendering methods but this worksection can be adapted to suit digital distribution and eTendering (electronic tendering system). If using eTendering, consult with the administrators of the system about the standard forms provided as part of the system and about amending these to suit your requirements.

0125 Standard contract checklists

The following worksection applies to standard contracts and provides checklists  for contract compilation, tender preparation, receipt of tenders and tender assessment.

0126 Supply and service checklists

The following worksection applies to period supply and service contracts and provides a checklist for commissioning of documentation, determination of technical requirements, document finalisation approval and the tender advertisement template.

0134 General requirements (Supply)

This worksection Template is applicable to the general requirements for a supply contract and includes the supply of labour, materials and plant to carry out the works. This worksection can be used for minor construction works. For major construction works use 0136 General requirements (Construction).

0135 General requirements (Service)

This worksection Template is applicable to the general requirements for a supply and service contract. The work under this contract comprises of supply of labour, materials and equipment necessary to carry out the services specified. It can be used for a single contract for provision of general goods and services over a period of time.

0136 General requirements (Construction)

This worksection Template is applicable to the site requirements of the Principal for construction projects. It includes a project description, work not in the contract, site investigations, signage, survey control, environmental planning, noise and vibration controls, utilities and authorities and site facilities.

0147 Conditions of Contract

This worksection Template is applicable to the General conditions of contract, Annexures to the contract and Special conditions of contract. The completed worksection forms VOLUME 1-Conditions of contract. This worksection is based on AS 2124 General conditions of contract. Amend this document for use with other general conditions of contract, special conditions, OH & S and environmental requirements. See NATSPEC disclaimer on the use of this worksection for this and other contracts.

0152 Schedule of rates - supply projects

This worksection consists of desriptions of quantities required for a schedule of rates for a construction project. The quantities shown are estimated quantities only and are not to be taken as correct quantities of work to be carried out or paid for under the various items of work.

0153 Schedules - Period supply and service

This worksection Template is applicable to the schedule of rates requirements for tenderers for period supply and service (Supply and Deliver) contracts.

0156 Contract schedules for road reserves

This worksection outlines the contract schedules for road reserves, bill of quantities and schedules daywork rates.

0161 Quality (Construction)

This worksection Template is applicable to the contractual requirements for the quality management system (QMS) documentation and operation for construction activities. This includes:

• Developing and implementing a basic QMS to AS/NZS ISO 9001.

• Developing and implementing a project quality plan to cover all work under the contract including permanent works, temporary works, on-site and off-site works.

• Keeping quality records.

0162 Quality (Supply)

This worksection Template is applicable to the quality requirements for delivery documentation of a quality assured product where the Producer has third party certification of an implemented quality system complying with AS/NZS ISO 9001.

0163 Quality (Delivery)

This worksection Template is applicable to the quality requirements for delivery of products for acceptance by the Principal in accordance with AS/NZS ISO 9001.

0166 Road reserve management plan requirements

This worksection sets out the requirements for the maintenance management plan to be provided by the contractor.

0167 Integrated management

This worksection Template is applicable to the documentation and operation of a system that collects the operating procedures of:

• Occupational Health and Safety.

• Environmental requirements.

• Quality requirements.

into a single integrated management system. The worksection addresses the contractor.

0181 SIKA Adhesives and sealants with fasteners

This branded worksection Template incorporates SIKA Australia adhesives, sealants with fasteners and provides basic defaults. It is applicable to projects that require adhesives, sealants and fasteners as part of general construction.

0184 TERMIMESH termite management

This branded worksection Template is applicable to various TERMIMESH non-chemical systems which may be used, alone or in combination, to provide termite management. The various systems are located together as the effectiveness of the termite barrier relies on the integration of the chosen systems. They may impact on the Earthwork, Concrete in situ, Brick and block construction and other worksections. The core standard is AS 3660.1.

0192 ANCON structural steel components

This branded worksection Template is applicable to ANCON structural steel components manufactured by Ancon Building Products consisting of proprietary suites supplied as complete systems, and including the following:

• Masonry support, windposts and lintels.

• Wall ties and restraint fixings.

• Channel and bolt fixings.

• Tension systems.

• Flooring and formed sections.

• Shear load connectors.

• Stainless steel reinforcement.

• Reinforcing bar couplers.

• Reinforcement continuity systems.

• Punching shear reinforcement.

• Steelwork fixings for structural and secondary steelwork.

• Cavity fixings for fixings to hollow section steel.

• Support systems for building services suspension.

0193 SAYFA fall protection and roof access

This branded worksection Template is applicable to the design, specification, installation and maintenance of roof fall protection systems and equipment as supplied by SAYFA Systems.

0194 RAVEN door seals and window seals

This branded worksection Template is applicable to RAVEN door and window seals against a combination of leakages and intrusions without impeding normal use. It should read in conjunction with a separate door by door hardware specification or schedule, prepared for the project to your office documentation policy. The door by door specification may be provided by a nominated architectural door hardware supplier This worksection sets out the seal parameters that should be called up for such a door by door specification.

0257 Landscape - roadways and street trees

This worksection Template is concerned with soft landscaping works and is applicable to:

• The vegetation of cut and fill batters, pathway verges, median areas and open drains.

• Surface preparation, topsoiling, fertilising, and turfing or sowing of seed and may include surface protection works, hydroseeding, hydromulching and straw mulching.

• The supply of plants, planting, fertilising, mulching, staking, watering and maintenance of plants including street trees.

0281 Bushfire Perimeter tracks

This worksection  Template is applicable to the construction of perimeter tracks for bushfire protection in rural and urban developments for Crown or private land. It addresses requirements for constructing and maintaining tracks in a way that minimises soil erosion and ensures reliable access under bushfire conditions.

0292 Masonry walls

This worksection Template is applicable to laying of concrete, brick or stone masonry units for construction of retaining walls and free-standing walls such as noise attenuation, dwarf and feature walls for landscaping or similar structures.

0293 Crib retaining walls

This worksection Template is applicable to the construction of proprietary timber crib and precast concrete crib retaining walls. This may involve the design and construction of structures required to retain and reinforce soil, rock and other materials. It consists of the excavation for foundations, construction of reinforced concrete footing, precast concrete or treated timber crib wall, selected backfill in and behind the crib wall, and subsurface drainage to the wall, as documented.

0310 AFS LOGICWALL in concrete combined

This branded worksection Template is applicable to the use of concrete for building and associated structures together with specialist wall system products by AFS for external and internal use. It combines relevant clauses from the following worksections: Concrete formwork, Concrete reinforcement, Concrete post-tensioned, Concrete in situ and Concrete finishes. Delete material as necessary.

0310 PENETRON admixtures in concrete

This branded worksection Template is applicable to the use of admixtures to produce low permeability concrete for special applications requiring reduction of water penetration through concrete elements. It is suitable for work of a scale or size that does not warrant the use of a separate worksection for each of the different parts of the concrete work. It combines relevant clauses from the ‘Stand alone’ concrete worksections. For large projects, use separate worksections.

0311 FIELDERS KingFlor in concrete formwork

This branded worksection Template is applicable to Fielders KingFlor, possibly in conjunction with other formwork types or systems, for the production of formwork for concrete work in buildings and associated structures.

0319 Minor concrete works

This worksection Template covers the supply and placement of concrete, including sprayed concrete, and ancillary requirements like excavation, preparation of foundations, forming up, placement of reinforcement and backfilling for work. Supplementary items covered including drainage pits and other supplementary structures, headwalls, box culverts, box culvert base slabs, driveways, footpaths, median toppings, retaining walls, footings, paving edge strips and works of a similar nature.

0341 FIELDERS purlins and girts in structural steel

This branded worksection Template is applicable to Fielders purlins and girts used in conjunction with structural steelwork. Fielders also offer bridging and fascia purlins along with accessories. Fielders purlins and girts are manufactured from Hi Tensile Galvanised Steel to conform with the Australian standard for cold form steel structures. They incorporate the latest computerised technology, coupled with efficiency in production.

0341 GALVASPAN® purlins and girts in structural steel

This branded worksection Template is applicable to purlins and girts made from GALVASPAN® steel used in conjunction with structural steelwork.

0343 MAKMAX tensile membrane structures

This branded worksection Template is applicable to MAKMAX suspended tensile membrane structures. It covers the supporting structure, tension members, anchorages and foundations, both attached to other structures or stand-alone. It is intended to apply to MAKMAX’s structures and systems which are covered by their details, specification and certification.

0345 DULUX steel protective paint coatings

This branded worksection Template is applicable to the surface preparation of and coating application to structural steelwork or steel products using paint coating systems supplied by DULUX where corrosion protection is appropriate due to climatic or environmental conditions. It can be used for new work and for maintenance painting.

0346 DULUX intumescent coatings in structural fire protection systems

This branded worksection Template is applicable to fire protection systems for building elements where achievement of a FRL is required. They can be specified in prescriptive terms or in performance terms (necessitating contractor-design and testing). The worksection is based on the BCA deemed-to-satisfy requirements (in BCA Spec A2.3), and the relevant recommendations of the standard AS 3784.1.

0383 BGC fibre cement decking and  flooring underlay

This branded worksection Template is applicable to BGC compressed  fibre cement decking and flooring and fibre cement  underlay in conjunction with external timber, composite or compressed fibre cement decking,  and to internal sheet flooring of plywood, particleboard or compressed fibre cement as either  platform floors  or fitted floors.  It assumes the provision of a supporting structure.

0411 DURAM waterproofing - external and tanking

This branded worksection Template is applicable to DURAM tanking and membrane applications to roofing, balconies, concrete slabs over below ground spaces and tanking. It relies on AS 4654.1 and AS 4654.2. It does not include concrete mixtures, penetrant sealers or decorative coatings.

0411 SIKA waterproofing - external and tanking

This branded worksection Template is applicable to SIKA tanking and membrane applications to roofing, balconies, concrete slabs over below ground spaces, planter boxes and tanking.

0423 COLORBOND® and ZINCALUME® roofing

This branded worksection Template is applicable to the provision of roof coverings made from profiled COLORBOND® and ZINCALUME® steel and roof plumbing, plastic profiled sheet roofing, glazed roofing, skylights, hatches and roof ventilators.

0423 FIELDERS roofing - profiled sheet metal

This branded worksection Template is applicable to the provision of roof coverings of FIELDERS profiled sheet metal and roof plumbing.

0423 REVOLUTION ROOFING in profiled sheet metal

This branded worksection Template is applicable to the provision of roof coverings of Revolution Roofing profiled sheet metal and roof plumbing.

0424 FIELDERS roofing - seamed sheet metal

This branded worksection Template is applicable to the provision of FIELDERS roof coverings of seamed sheet non-ferrous metal and COLORBOND® pre-painted steel and roof plumbing.

0428 DANPALON roof glazing

This branded worksection Template is applicable to Danpalon roof glazing and glazed awning systems by Danpal Australia Pty Limited.

0429 SOLATUBE tubular daylighting devices and skylights

This branded worksection Template is applicable to the selection and installation of Solatube Tubular Daylighting Devices and skylights.

0434 ALUCOBOND cladding

This branded worksection Template is applicable to lightweight external fascias and wall cladding and detailed fixtures of Alucobond® aluminium composite panels.

0434 DANPALON translucent facade cladding

This branded worksection Template is applicable to Danpalon lightweight external wall cladding by Danpal Australia Pty Limited.

0434 FIELDERS cladding - panels

This branded worksection Template is applicable to FIELDERS lightweight external wall cladding of Titanium Zinc panels and seamed sheet.

0436 COLORBOND® and ZINCALUME® cladding

This branded worksection Template is applicable to lightweight external wall cladding of COLORBOND® and ZINCALUME® profiled sheet metal products.

0436 FIELDERS cladding - profiled sheet metal

This branded worksection Template is applicable to FIELDERS lightweight external wall cladding of profiled sheet metal products.

0438 BGC fibre cement cladding

This branded worksection Template is applicable to BGC fibre cement plank cladding and flat cladding systems of fibre cement and compressed fibre cement sheets.

0438 KNAUF aggregate cement board cladding

This branded worksection Template is applicable to KNAUF PermaRock™ aggregate cement board exterior system for lightweight, virtually seamless monolithic facades and soffit lining). Used as a substrate for ventilated exterior walls and for directly applied water managed system, PermaRock™ is also suitable for curved facades.

0451 AWS aluminium windows and doors

This branded worksection Template is applicable to commercial aluminium framed windows and glazed doors manufactured by AWS ARCHITECTURAL WINDOW SYSTEMS PTY LTD and residential aluminium framed windows and glazed doors manufactured by VANTAGE ALUMINIUM JOINERY; consisting of proprietary suites supplied as complete systems, and including the following:

• Glazing, hardware and associated, integral blinds, louvres, and grilles.

• Installation accessories, such as fixings, flashings, sealants and seals, caulking and weather-stripping, necessary for the satisfactory functioning of the whole.

0451 CENTOR in windows and glazed doors

This branded worksection Template is applicable to CENTOR bi-fold hardware and retractable screens for windows and glazed doors consisting of proprietary lines (or suites) of manufactured products, supplied as complete systems, fabricated and assembled to the standard designs of specialist firms in documented materials such as aluminium, steel, timber and plastics, and including the following:

• Glazing, hardware and associated integral blinds, louvres, and grilles.

• Installation accessories, such as fixings, flashings, sealants and seals, caulking and weather-stripping, necessary for the satisfactory functioning of the whole

0455 KABA door hardware

This branded worksection Template is applicable to all the hardware associated with doors supplied by KABA Australia Pty Ltd. Door seals are specified in Doors and access panels. It is preferred that this worksection is read in conjunction with a “door-by-door” specification, as provided free of charge by KABA incorporating all facets of hardware, access control, and the security of keying requirements. This worksection sets out the parameters for such a “door-by-door” schedule.

0456 BREEZWAY louvre windows

This branded worksection Template is applicable to BREEZWAY LOUVRE WINDOWS manufactured by Breezway Australia Ltd. consisting of proprietary suites supplied as complete systems, and including installation accessories, such as fixings, flashings, sealants, caulking and weather-stripping, necessary for the satisfactory functioning of the whole.

0458 DOORWAYS-KABA GILGEN automatic doors

This branded worksection Template is applicable to the supply and installation of DOORWAYS-KABA GILGEN Automatic doors for commercial installations including; sliding, swing, telescopic, bi-fold and numerous other models. Some of these models also suit domestic applications for access/egress and wide openings for expanding living and entertaining areas.

0461 VIRIDIAN glazing

This branded worksection Template is applicable to VIRIDIAN glazing in framed openings to windows, doors and curtain walls based around AS 1288.

0462 SIKA structural glazing

This branded worksection Template is applicable to the installation of the following SIKA structural glazing systems:

• Structural silicone glazing in which the glass is adhered to the framing system with a structural sealant.

• Framed, unframed and partly framed glass assemblies including faceted glazing, fin supported glazing, patch plate jointed suspended glazing and point fixed glazing incorporating spider type glass fittings.

• Suspended frameless glass assembly with wind stiffening systems.

• Weatherproofing sealants for general glazing.

0471 AUTEX insulation and sarking membranes

This branded worksection Template is applicable to insulation and sarking membranes for roofs, ceilings, walls and floors. It is generally specified around AS 3999, AS/NZS 4200.1, AS/NZS 4200.2 and AS/NZS 4859.1. A sarking membrane can be used for waterproofing, vapour proofing and reflective insulation separately or combined. This worksection does not relate to insulation for Services (e.g. for ductwork, which is dealt with in Ductwork insulation).

0471 KINGSPAN in insulation and sarking membranes

This branded worksection is applicable to KINGSPAN insulation and sarking membranes for roofs, ceilings, walls and floors. It is generally specified around AS 3999, AS/NZS 4200.1, AS/NZS 4200.2 and AS/NZS 4859.1. A sarking membrane can be used for water proofing, vapour proofing and reflective insulation separately or combined.

0471 KNAUF insulation and sarking membranes

This branded worksection Template is applicable to KNAUF insulation and sarking membranes for roofs, ceilings, walls and floors. It is generally specified around AS 3999, AS/NZS 4200.1, AS/NZS 4200.2 and AS/NZS 4859.1 A sarking membrane can be used for water proofing, vapour proofing and reflective insulation separately or combined.

0472 AUTEX acoustic insulation

This branded worksection Template is applicable to acoustic insulation to walls and ceilings of individual rooms.

0473 DAMTEC acoustic floor underlays

This branded worksection Template is applicable to reducing impact sound transmission through floors using BCA compliant DAMTEC underlays for all floor finishes.

0511 KEYSTONE ACOUSTICS in lining

This branded worksection Template is applicable to the installation of Keystone Acoustics perforated acoustic lining systems permanently fixed to internal walls and framed ceilings.

0522 BGC partitions - framed and lined

This branded worksection Template is applicable to internal partitions framed in either lightweight steel or timber and lined with BGC plasterboard or fibre cement products, with bulk acoustic insulation or autoclaved aerated concrete panels; as a complete trade package.

0522 KNAUF in partitions - framed and lined

This full worksection Template is applicable to KNAUF internal partitions framed in either lightweight steel or timber and lined, with bulk acoustic insulation or autoclaved aerated concrete panels; as a complete trade package.

0531 AMF AUSTRALIA in suspended ceilings

This branded worksection Template is applicable to suspended internal ceilings of dry construction supplied by AMF Australia with suspension systems attached to a supporting structure.

0531 KNAUF in suspended ceilings

This full worksection Template is applicable to KNAUF tiles, panels and linings for proprietary suspended internal ceilings and external soffits of dry construction with suspension systems attached to a supporting structure.

0531 MIKOR suspended ceilings

This branded worksection Template is applicable to MIKOR suspended internal ceilings and external soffits of dry construction with suspension systems attached to a supporting structure.

0531 USG suspended ceilings

This branded worksection Template is applicable to USG Australasia suspended internal ceilings and external soffits of dry construction with suspension systems attached to a supporting structure.

0541 ASP Access floors

This branded worksection Template is applicable to ASP Access Floors pedestal access floor systems, covered by AS 4154.

0541 TASMAN access floors

This branded worksection Template is applicable to TASMAN pedestal access floor systems covered by AS 4154.

0551 HETTICH hardware in joinery

This branded worksection Template is applicable to the shop fabrication and site installation of custom made joinery fixtures incorporating Hettich joinery hardware fittings and systems.

0554 SAYFA stairs, ladders, walkways and guardrails

This branded worksection Template is applicable to the design, specification, installation and maintenance of stairs, ladders, fixed platforms and walkways for commercial and industrial applications as supplied by SAYFA Systems.

0612 POLYFLOR KIESEL self levelling cementitious toppings

This branded worksection Template is applicable to Polyflor Australia Pty Ltd for its Kiesel brand of self levelling cementitious toppings on floors. There is no relevant standard in but there are numerous guides available from BRANZ and the Cement and Concrete Association.

0621 DURAM waterproofing - wet areas

This work section Template is applicable to waterproof membrane applications to wet areas as supplied by DURAM Industries Pty Ltd and is written with reference to AS 3740 and AS/NZS 4858.

0621 LATICRETE waterproofing - wet areas

This branded worksection Template is applicable to Laticrete waterproof membrane applications to wet areas and is written with reference to AS 3740 and AS/NZS 4858.

0621 SIKA waterproofing - wet areas

This branded worksection Template is applicable to waterproof membrane applications to wet areas as supplied by SIKA AUSTRALIA Pty Ltd and is written with reference to AS 3740 and AS/NZS 4858.

0631 LATICRETE in ceramic tiling

This branded worksection Template is applicable to floor and wall ceramic tiling incorporating Laticrete adhesives, admixes, screeds, renders and grouting materials. Tiles may be specified by manufacturer’s brand name or by generic type, plus essential characteristics such as size, colour, surface, edge type etc. Bedding, grouting, fixing and jointing requirements should also be specified.

0632 LATICRETE in stone and terrazzo tiling

This branded worksection Template is applicable to stone tiling, industrial cast stone tiling, terrazzo tiling (cementitious and resinous) and manufactured cementitious tiling on various substrates incorporating Laticrete adhesives, admixes screeds, renders and grouting materials.

0651 DALSOUPLE in resilient finishes

This branded worksection Template is applicable to resilient sheet and tile laid finishes with associated underlay including synthetic sporting surfaces and rubber products produced by Dalsouple Australasia Pty Ltd.

0651 FORBO resilient finishes

This branded worksection Template is applicable to resilient products supplied by FORBO FLOORCOVERINGS PTY LTD as follows:

• Sheet linoleum floor finishes supplied as Marmoleum, Artoleum and Corkment underlay.

• Commercial vinyl sheet and tile floor finishes supplied as Project vinyl in Slip resistant, Wetroom and High performance grades.

• Domestic cushioned vinyl floor finishes.

• Accessories comprising linoleum and vinyl welding cable and pre-formed coved linoleum and vinyl skirtings.

• Static conductive sheet vinyl supplied as ColoRex EC.

• Static dissipative sheet vinyl supplied as ColoRex SD.

• Linoleum supplied as Marmoleum Ohmex.

• Adhesives.

0651 POLYFLOR resilient finishes

This branded worksection Template is applicable to resilient sheet and tile laid products supplied by PolyflorAustralia Pty Ltd as follows:

• Homogenous sheet vinyl with polyurethane coating.

• Homogenous sheet vinyl with slip resistant qualities.

• Heterogeneous sheet vinyl with polyurethane coating.

• Heterogeneous sheet vinyl with acoustic rating.

• Synthetic rubber sheet and tile floorcoverings.

• Semi-flexible vinyl composition tiles.

• Static conductive and dissipative sheet vinyl.

• Flexible sheet vinyl sport flooring.

• Vinyl wall cladding.

• Accessories comprising vinyl weld rod, capping strip, cove former and preformed vinyl skirtings.

• Adhesives.

0652 DUNLOP cushion in carpets

This branded worksection is applicable to carpet materials, including broadloom carpet, carpet tiles and carpet cushion (underlay) from Dunlop Flooring, their fixing methods and cleaning. It refers to AS/NZS 2455.

0657 NUPLEX resin based flooring

This branded worksection Template is applicable to NUPLEX resin based applied flooring and includes in situ resinous terrazzo flooring.

0657 SIKA resin based seamless flooring

This branded worksection Template is applicable to resin based seamless flooring by SIKA Australia and includes in situ resinous terrazzo flooring.

0671 DULUX painting

This branded worksection Template is applicable to the in situ application of DULUX coating films to buildings and interior elements. The worksection outlines requirements for materials, workmanship and equipment involved in the preparation and application of:

• Painting systems over various substrates, including the priming coat or system for the protection on non-structural metals;

• Clear finishes and transparent staining systems for high quality indoor woodwork.

0671 RESENE painting

This branded worksection Template is applicable to the in situ application of RESENE coating films to buildings and interior elements. The worksection outlines requirements for materials, workmanship and equipment involved in the preparation and application of:

• Painting systems over various substrates, including the priming coat or system for the protection on non-structural metals;

• Clear finishes and transparent staining systems for high quality indoor woodwork.

0671 SOLVER painting

This branded worksection Template is applicable to the in situ application of SOLVER coating films to buildings and interior elements. The worksection outlines requirements for materials, workmanship and equipment involved in the preparation and application of:

• Painting systems over various substrates, including the priming coat or system for the protection on non-structural metals;

• Clear finishes and transparent staining systems for high quality indoor woodwork.

0671 TAUBMANS painting

This branded worksection Template is applicable to the in situ application of TAUBMANS coating films to buildings and interior elements. The worksection outlines requirements for materials, workmanship and equipment involved in the preparation and application of:

• Painting systems over various substrates, including the priming coat or system for the protection on non-structural metals;

• Clear finishes for high quality indoor woodwork.

0671 WATTYL painting

This branded worksection Template is applicable to the in situ application of TAUBMANS coating films to buildings and interior elements. The worksection outlines requirements for materials, workmanship and equipment involved in the preparation and application of:

• Painting systems over various substrates, including the priming coat or system for the protection on non-structural metals;

• Clear finishes for high quality indoor woodwork.

0672 GRANOSITE coatings

This branded worksection Template is applicable to the in situ application of GRANOSITE latex extensible (membrane) coating and textured surface coating systems to buildings and interior elements. The primary referenced standard is AS/NZS 2311 which provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use. Textured coatings are described generically in AS/NZS 2311 clause 4.14.

0673 AAF anodising, powder coatings and fluropolymer

This branded worksection Template is applicable to the off-site application by AAF (Australian Aluminium Finishing) of anodising, powder coating and fluoropolymer systems to aluminium architectural applications, and to exterior and interior buildings elements. The primary referenced standards are AS 3715 for architectural applications of aluminium and aluminium alloys; AS 1231 for anodising and AAMA 2605.

0731 FANTECH fans

This branded worksection Template is applicable to FANTECH centrifugal, axial flow, mixed flow and propeller fans, roof mounted fans and window/wall mounted fans of the type commonly used in air conditioning and ventilation systems.

0745 FANTECH attenuators and acoustic louvres

This branded worksection Template is applicable to FANTECH duct mounted sound attenuators and wall mounted acoustic louvres.

0752 SEKISUI PILON mechanical piping insulation

This full worksection Template is applicable to the Sekisui Pilon insulation and sheathing for piping, tanks vessels and flues.

0815 BILLI boiling, chilled and filtered water dispensers

This branded worksection Template is applicable to boiling, chilled and filtered water unit dispensers produced by BILLI Pty Limited. The reference standards for this worksection are AS/NZS 3500.1 and AS/NZS 3500.4 which are cited by the PCA.

0937 EATON ELECTRICAL uninterruptible power supply

This branded worksection Template is applicable to EATON ELECTRICAL battery driven, static uninterruptible power supplies (UPSs) designed to provide an instantaneous, short term 50 Hz power supply in the event of interruption to the normal power supply. It is not intended for direct grid connection purposes.

0943 EATON ELECTRICAL switchboard components

This branded worksection Template is applicable to EATON ELECTRICAL protective and control devices and for the selection of switchboard accessories.

0943 ERICO in switchboard components

This branded worksection Template is applicable to ERICO electrical products for surge protection and earthing and for the selection of switchboard components.

0979 ERICO in lightning protection

This branded worksection Template is applicable to the provision of ERICO lightning protection systems to achieve a tolerable level of risk for buildings. It relies on AS/NZS 1768 and assumes a system is required, either following an assessment of risk or regardless of the outcome of any risk assessment, for example, when there is a desire for no avoidable risk.